(281) 231-0001

NDT Ideas & News

Get Trained in Magnetic Particle Testing and Inspection to Take-off Your Career

calendar Jul. 01, 2016user-iconTXNDT

Mastering Magnetic Particle Testing to Get Ahead

Magnetic particle testing or MT is a nondestructive testing technique for detecting surface as well as near surface separations in ferromagnetic stuffs. The procedure lays a magnetic field into the element. The part is actually magnetized by either direct or indirect magnetic induction. Direct magnetic induction takes place when an electric current is guided via the test object whereby a magnetic field is created in the object. When a magnetic field is enforced via an external source indirect magnetization occurs on the test object.

The existence of a surface or a subsurface separation in the test object lets the magnetic flux to reveal, since air is not able to withhold the same quantity of magnetic field per unit volume as is done by metals. Now ferrous particles are applied to the section. The particles can be either dry or wet suspension. If a region of flux leakage is found, the particles will automatically be attracted to this region. The molecules will then gather at the region of leakage and shape what is recognized as an indication. The indication will then assessed to find out what it is, what the cause is for this, and what activity should be called for, if required. When you take up a course at NDT academy then you will without any doubt taught all these methods and how you do it will be shown practically to you.


The major industrial applications of MT testing are ultimate inspection, receiving check, in process scrutiny plus quality control, preservation plus repair in the transport industries, plant as well as machinery preservation and check up of huge constituents.

Magnetic particle inspection training will help you and show you how the cost-effective and relative quicker non-destructive test technique is applied extensively in petrochemical industries, power generation, Locomotive, nuclear, automotive, Aerospace.
Magnetic particle testing methods are a very receptive type of testing technique. It can sense tense operating weariness breaks in revolving parts or sneak fractures on steam piping. Magnetic Particle Inspection cannot be used to test the authenticity of austenitic stainless steels as it is neither non-ferrous nor non-magnetic ferrous material.

Magnetic particle testing training can be taken up at the Texas NDT Academy for that advanced learning. Training in this technique is one of the nucleus parts of TXNDT. If you want a career in MT testing then a magnetic particle inspection certification is a must.